1. 2. 3. material content data sheet sales product name bsc060p03ns3e g issued 28. november 2014 ma# MA000650868 package pg-tdson-8-1 weight* 120.92 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 2.479 2.05 2.05 20502 20502 leadframe non noble metal iron 7439-89-6 0.038 0.03 313 inorganic material phosphorus 7723-14-0 0.011 0.01 94 non noble metal copper 7440-50-8 37.762 31.21 31.25 312281 312688 wire non noble metal copper 7440-50-8 0.057 0.05 0.05 475 475 encapsulation organic material carbon black 1333-86-4 0.083 0.07 690 plastics epoxy resin - 5.923 4.90 48985 inorganic material silicondioxide 60676-86-0 35.707 29.53 34.50 295290 344965 leadfinish non noble metal tin 7440-31-5 1.452 1.20 1.20 12005 12005 plating noble metal silver 7440-22-4 0.166 0.14 0.14 1369 1369 solder noble metal silver 7440-22-4 0.057 0.05 475 non noble metal tin 7440-31-5 0.046 0.04 380 non noble metal lead 7439-92-1 2.195 1.82 1.91 18154 19009 clip plating noble metal silver 7440-22-4 1.289 1.07 1.07 10664 10664 heatspreader non noble metal iron 7439-89-6 0.011 0.01 94 inorganic material phosphorus 7723-14-0 0.003 0.00 28 non noble metal copper 7440-50-8 11.320 9.36 9.37 93614 93736 heat sink clip non noble metal iron 7439-89-6 0.022 0.02 185 inorganic material phosphorus 7723-14-0 0.007 0.01 55 non noble metal copper 7440-50-8 22.292 18.43 18.46 184347 184587 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
